The Draw Tite trailer hitch part # 24945 is perfectly compatible with the Thule Easy Fold XT part # TH903202 that you referenced since the rack is Class I hitch compatible. The pin hole dimension you are asking for is based on an intentional design of Class II hitch accessories. They are designed to not fit all the way into a lower weight rated Class I hitch which is why it seems like the pin hole isn't deep enough. view full answer...
The Curt Trailer Hitch, # C11174, for the 2000 BMW 3 Series, has a tongue weight capacity of 200 pounds and would not be able to hold the weight of a motorcycle rack and motorcycle. If using a hitch-mounted rack, the tongue weight would be the combined weight of the motorcycle and the rack. All of the available hitches for your vehicle are Class I, 1-1/4 inch trailer hitches with 200 pound tongue weight capacities and 2,000 pound gross trailer weight capacities.
However, the tongue weight... view full answer...
According to SportRack, their # SR1008 is considered a fit for your 1995 BMW 318is, among several other vehicles. SportRack bills this as a 'semi-custom' fit, meaning it'll fit many different vehicles fairly well.
The least expensive custom fit roof rack we offer is the Inno Square Bar roof rack, which consists of the following parts:
# INB117 46 Inch Square Crossbars
# INSUT Roof Rack Feet
# INK127 Vehicle Specific Fit Clips
Because it's a custom fit rack, the Inno option will fit much... view full answer...
The bearing size is needed to confirm the fit of the bearing buddy needed. There are some Karavan trailers that use sealed bearings that cannot use Bearing Buddy grease protectors, but those specific bearings don't need them because they are maintenance free and sealed to keep water out.
If you pull a hub, you will find the bearings and if you have standard tapered bearings, the number of the bearing will be printed on the hub face when you clean the grease off that portion. If you... view full answer...
According to Curt, their # C11367 Class I hitch is a fit for all models of the 2018 BMW 340i xDrive including the GT model.
If you'll be doing some light duty towing, you'll also need a trailer wiring harness like # 119250KIT, a ball mount like # C45521, a hitch pin like # PC2 and a trailer ball like # A-80 for a 1-7/8 or # A-82 for a 2 inch ball.
I've linked to an install video for the hitch. view full answer...
The Replacement SuperCush Cradle # 8880597 and the Replacement ZipStrip with Anti-Sway Cradle # Y43KV are made specifically for the Yakima brand bike racks. They are both designed to fit on a 1-5/16" round tube. We do not carry the Allen brand bike racks here at etrailer so we cannot say with certainty that it will be a fit. If your Allen bike rack also uses a 1-5/16" diameter tube it should work just fine. view full answer...
The Stealth Hitches Hidden Rack Receiver # SH34VR you were looking at is indeed confirmed to fit your 2021 BMW 340i sedan. I was able to confirm this with Stealth hitches.
This receiver is designed for carrying a bike rack or cargo carrier and cannot be used with a ball mount for towing a trailer.
If you will be planning on towing a trailer at some point you will need to pick up the Towing Kit # 391CONVA7. This comes with the tow bar portion designed for towing with this hitch, and also... view full answer...
The Draw-Tite Sportframe Trailer Hitch Receiver # 24857 referenced in your question is confirmed to fit your 2011 BMW 328i Sedan. This is a Class I trailer hitch that will provide a tongue weight capacity of 200 pounds. I have included the installation details that you can look over.
Then for a hitch adapter that will expand the receiver opening to 2 inches, I recommend the Brophy Hitch Adapter # HT5R. This is very similar to the MaxxTow MT70355 you referenced, however the MaxxTow is... view full answer...
We have had several customers come back and say they were able to install the Curt Hitch part # C11367 on their 2012 BMW 328ix Wagon so we can safely say it will fit.
For trailer wiring you would then want the zero contact wiring harness part # 119250KIT which is a confirmed fit and doesn't' require any hardwiring.
For a 1-7/8 inch ball mount you would want part # C45571 or for a 2 inch ball part # C45572. view full answer...
Yes, the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11367 is the hitch you need for your 2016 BMW 328i Sports Wagon because it is equipped with xDrive. This hitch will work great for your bike rack as well as any other accessories you might want to mount with your vehicle, such as a cargo carrier.
The Kuat Sherpa rack, such as the #SH12B , includes straps on both the front and rear wheel cradles, which keeps them stable while they rest on the platform. The product is... view full answer...
The Curt hitch # C11367 will fit your 2017 BMW if it is a 340i xDrive Sedan. It is a bolt-on installation with a 1-1/4" receiver. I've attached a link showing this hitch being installed on a 2015 BMW 3 Series.
Please keep in mind this hitch is going to require the use of stabilizing straps # 18050 with all non-trailer accessories such as bike racks and cargo carriers in order to maintain the warranty. I've added a link to a demonstration video which shows you how the straps are used. view full answer...
The Yakima Fullback, part # Y02634 is a great rack that is a confirmed fit for 2014 BMW 3 Series. It also includes locks to secure your rack and your bikes. Check out the review video that I attached for you. view full answer...
The Curt Class I 1-1/4 Inch Hitch, part # 11178, will fit your 2004 BMW 330ci Convertible. It is a Class I hitch with a towing weight capacity of 2,000 lbs and a tongue weight capacity of 200 lbs. I am including a link to the installation instructions on the Curt hitch.
For a wheel mount bike rack that will work on a Class I hitch I recommend the Kuat Transfer, part # KU74FR. This bike rack has a maximum weight capacity of 80 lbs and will work with a wide range of bikes, including most... view full answer...
I have great news! Using a wired back up-camera like the Hopkins # HM50002 won't interfere with your Valentine One radar detector since the V1 plugs into your lighter socket or using the optional direct-wire power adapter.
Keep in mind that any other wireless device that operates on 2.4 GHz (like a Bluetooth or in-car internet) can interfere with the reception quality of a wireless backup camera.
I included a helpful video review on the Hopkins backup camera for you as well. view full answer...
There is not a trailer hitch receiver at this time confirmed to fit your 2006 BMW 330i Sedan. For a confirmed fit trunk mounted rack, I recommend the Thule Archway XT 2-Bike Rack - Trunk Mount - Adjustable Arms # TH9009XT. This will protect your vehicle and comes with all the security features and the Road Dampening Hold Fast Cradles.
You may also be interested in the Malone Bike Adapter Bar for Women's, Children's, and Alternative Frame Bikes # MPG2165 to give you ground clearance and... view full answer...
For a standard trailer hitch you can use the Draw-Tite # 24857 on your 2007 BMW 328i sedan. This is a Class I hitch with a 1-1/4" receiver which will be effective for things like really small trailers, bike racks, and cargo carriers.
If you'd like something a little more beefy that also looks sleek we have the Stealth Hitches system which comes as part # SH44VR for recreational products (like bike racks and cargo carriers) and part # SH88VR which comes with the part for recreational products... view full answer...
Thule has roof racks that fit your 2018 BMW 330i wagon but the part # TH460R is actually an older style foot kit that is no longer supported. So what you would need is the Evo style racks like the Wingbar Evo part numbers # TH711220, # TH710601, # TH186007 which is a confirmed fit for your vehicle. view full answer...
While there is definitely a way to determine if the Yakima Kayak Carrier # Y04083-04082 fit onto your OEM roof rack on your 2013 BMW 328xi Sedan, we do not have the exact width and height specs for your particular crossbars. With that being said, the # Y04083-04082 is designed to fit crossbars that do not exceed 3-1/8" wide x 1" tall. As long as your crossbars are within these parameters, you can use the carrier. I recommend measuring your height and width of your bars to make sure. It... view full answer...
The easiest way to identify the needed replacement bearing kit is to obtain the reference numbers off the existing bearings. Your best bet would be to clean the existing bearings and closely examine them for the reference numbers.
Given the inside diameter you provided, the bearings could be a # LM67048, # 15123 or # 14125A, all of which have a 1.25 inch inside diameter. All three bearings are listed as outer bearings for certain hubs, none of the hubs we offer would use these as both... view full answer...
The Highland Floor Mats, # 46030, for your 2002 BMW 3 Series is a 2 piece set that will fit the front drivers side and passenger side. view full answer...
Go To Results